PartsTable
Technical Data Sheet
Download PDF

824-16 — 824-16

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

824-16: 824-16.

The 824-16 is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.967 INCHES MINIMUM AND 1.017 INCHES MAXIMUM IN, thread_length: 0.594 INCHES MINIMUM IN, screw_material: STEEL COMP 1010, fastener_length: 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-774-0510, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 824-16
NSN: 5305-00-774-0510
NIINs: 007740510, 008591276, 013817533
FSC: 5305 — Screws
CAGE: 41885 — HAYES WHEELS INTL INC AKRON OPNS (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.967 INCHES MINIMUM AND 1.017 INCHES MAXIMUM IN
thread_length0.594 INCHES MINIMUM IN
screw_materialSTEEL COMP 1010
fastener_length0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE II
nominal_thread_diameter0.500 INCHES IN
screw_surface_treatmentCADMIUM OR ZINC
thread_quantity_per_inch13
NSN5305-00-774-0510
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 824-16 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
•
FASTENER LENGTH: 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.594 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 1010
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM OR ZINC
FASTENER LENGTH0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-630 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.594 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 1010
INTERNAL DRIVE STYLECROSS RECESS TYPE II
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES 1
2232088Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 824-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 824-16?
824-16 is a 824-16. It is classified as a MRO (MRO_GENERAL).
What parts can replace 824-16?
There is 1 known substitute for 824-16: 2232088. Substitute compatibility should be verified for your specific system.
What is the NSN for 824-16?
824-16 is cataloged in the U.S. Government catalog under NSN 5305-00-774-0510. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 824-16

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.