PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 82320-6-1
82320-6-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.128 INCHES NOMINAL IN, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.040 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-208-2269, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
82320-6-1
NSN: 5340-00-208-2269
FSC: 5340
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
diameter0.128 INCHES NOMINAL IN
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.422 INCHES NOMINAL IN
material_document_and_classificationAMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.661 INCHES MINIMUM AND 0.671 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.510 INCHES NOMINAL IN
NSN5340-00-208-2269
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 82320-6-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.510 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.422 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.128 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.661 INCHES MINIMUM AND 0.671 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.510 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.422 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.128 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.375 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.661 INCHES MINIMUM AND 0.671 INCHES MAXIMUM IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
7-16-4TInterchangeable
interchangeable cross-reference
interchangeable
108280Interchangeable
interchangeable cross-reference
interchangeable
F4TL-437WTInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 82320-6-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 82320-6-1?
82320-6-1 is a CLAMP,LOOP.
What parts can replace 82320-6-1?
There are 3 known substitutes for 82320-6-1: 7-16-4T, 108280, F4TL-437WT. Substitute compatibility should be verified for your specific system.
What is the NSN for 82320-6-1?
82320-6-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-208-2269. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 82320-6-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026