PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 82276 REV J ITEM 45
82276 REV J ITEM 45 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, outside_diameter: 1.500 INCHES NOMINAL IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-506-6481, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
82276 REV J ITEM 45
NSN: 5330-01-506-6481
FSC: 5330
CAGE: 89357 — EVOQUA WATER TECHNOLOGIES LLC (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
outside_diameter1.500 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-506-6481
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 82276 REV J ITEM 45 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
OUTSIDE DIAMETER: 1.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
OUTSIDE DIAMETER1.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
090-08201Interchangeable
interchangeable cross-reference
interchangeable
82290Interchangeable
interchangeable cross-reference
interchangeable
N577PC17Interchangeable
interchangeable cross-reference
interchangeable
03692700Interchangeable
interchangeable cross-reference
interchangeable
03-2753Interchangeable
interchangeable cross-reference
interchangeable
CS6021SNKInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 82276 REV J ITEM 45?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 82276 REV J ITEM 45?
82276 REV J ITEM 45 is a GASKET.
What parts can replace 82276 REV J ITEM 45?
There are 6 known substitutes for 82276 REV J ITEM 45: 090-08201, 82290, N577PC17 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 82276 REV J ITEM 45?
82276 REV J ITEM 45 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-506-6481. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 82276 REV J ITEM 45

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026