PartsTable
Technical Data Sheet
Download PDF

8225065-1 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8225065-1: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, body_width: 4.000 INCHES NOMINAL IN, leaf_width: 1.875 INCHES NOMINAL IN, rising_pin: INCLUDED, knuckle_type: FRICTION, overall_length: 48.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-574-9466, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8225065-1
NSN: 5340-01-574-9466
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
body_width4.000 INCHES NOMINAL IN
leaf_width1.875 INCHES NOMINAL IN
rising_pinINCLUDED
knuckle_typeFRICTION
overall_length48.000 INCHES NOMINAL IN
knuckle_quantity6
performance_typeNOT RATED
pin_removabilityREMOVABLE
special_featuresTYPE; PIANO HINGE, GEN PURPOSE; FINISH; UNFINISHED; WITHOUT MOUNTING HOLES; LEAF THICKNESS; 0.120 INCHES; RANGE OF MOTION; 270 DEGREES; REVERSIBLE IN
style_designatorBUTT
end_item_identificationRMV SPT CONTA
NSN5340-01-574-9466
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8225065-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KNUCKLE INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
BODY WIDTH: 4.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BUTT
•
PIN REMOVABILITY: REMOVABLE
•
LEAF WIDTH: 1.875 INCHES NOMINAL IN
•
KNUCKLE QUANTITY: 6
TECHNICAL CHARACTERISTICS
KNUCKLE INSIDE DIAMETER0.250 INCHES NOMINAL IN
BODY WIDTH4.000 INCHES NOMINAL IN
STYLE DESIGNATORBUTT
OVERALL LENGTH48.000 INCHES NOMINAL IN
PIN REMOVABILITYREMOVABLE
LEAF WIDTH1.875 INCHES NOMINAL IN
KNUCKLE QUANTITY6
SPECIAL FEATURESTYPE; PIANO HINGE, GEN PURPOSE; FINISH; UNFINISHED; WITHOUT MOUNTING HOLES; LEAF THICKNESS; 0.120 INCHES; RANGE OF MOTION; 270 DEGREES; REVERSIBLE IN
END ITEM IDENTIFICATIONRMV SPT CONTA
MATERIALUNABLE TO DECODE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
1582A102Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8225065-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8225065-1?
8225065-1 is a HINGE,BUTT.
What parts can replace 8225065-1?
There is 1 known substitute for 8225065-1: 1582A102. Substitute compatibility should be verified for your specific system.
What is the NSN for 8225065-1?
8225065-1 is cataloged in the U.S. Government catalog under NSN 5340-01-574-9466. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8225065-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.