PartsTable
Technical Data Sheet
PartsTable / MRO / 822-32
822-32 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include bearings: INCLUDED, diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: PLASTIC POLYCARBONATE BODY, bore_type: STRAIGHT, face_width: 0.595 INCHES NOMINAL IN, lens_color: YELLOW. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-415-5212, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 822-32
NSN: 5340-00-415-5212
FSC: 5340
CAGE: 83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
bearingsINCLUDED
diameter0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialPLASTIC POLYCARBONATE BODY
bore_typeSTRAIGHT
face_width0.595 INCHES NOMINAL IN
lens_colorYELLOW
shaft_typeROUND, FLATTED SINGLE ACTUATOR
bore_length0.595 INCHES NOMINAL IN
design_formPLAIN
flat_height0.186 INCHES NOMINAL SINGLE ACTUATOR IN
bearing_typeSLEEVE
bore_featureINCLUDED
NSN5340-00-415-5212
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 822-32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.683 INCHES MINIMUM AND 1.753 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
MATERIALASBESTOS CUSHION
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT
TONGUE HOLE TYPEROUND, UNTHREADED
DISTANCE FROM LOOP CENTER TO TONGUE END1.683 INCHES MINIMUM AND 1.753 INCHES MAXIMUM IN
STYLE DESIGNATOROFFSET MOUNT
DIAMETER0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
311-605Interchangeable
interchangeable cross-reference
interchangeable
62-54-1Interchangeable
interchangeable cross-reference
interchangeable
311-0605-00Interchangeable
interchangeable cross-reference
interchangeable
9994Interchangeable
interchangeable cross-reference
interchangeable
9175813-3Interchangeable
interchangeable cross-reference
interchangeable
P809074Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 822-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 822-32?
822-32 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 822-32?
There are 13 known substitutes for 822-32: 311-605, 62-54-1, 311-0605-00 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 822-32?
822-32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-415-5212. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 822-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026