PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8218-10-03
8218-10-03 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, outside_diameter: 1.500 INCHES NOMINAL IN, aperture_diameter: 1.127 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-801-8082, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8218-10-03
NSN: 5330-00-801-8082
FSC: 5330
CAGE: 35526 — MCLAREN J C BELTING INC (CAN)
SPECIFICATIONS
materialCELLULOSE OVERALL
outside_diameter1.500 INCHES NOMINAL IN
aperture_diameter1.127 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-801-8082
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8218-10-03 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.500 INCHES NOMINAL IN
•
MATERIAL: CELLULOSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.127 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.500 INCHES NOMINAL IN
MATERIALCELLULOSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER1.127 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
JT9312CInterchangeable
interchangeable cross-reference
interchangeable
106516Interchangeable
interchangeable cross-reference
interchangeable
RDCL1525-1Interchangeable
interchangeable cross-reference
interchangeable
FS916FEDInterchangeable
interchangeable cross-reference
interchangeable
52-65Interchangeable
interchangeable cross-reference
interchangeable
EEA2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8218-10-03?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8218-10-03?
8218-10-03 is a GASKET.
What parts can replace 8218-10-03?
There are 24 known substitutes for 8218-10-03: JT9312C, 106516, RDCL1525-1 and 21 more. Substitute compatibility should be verified for your specific system.
Is 8218-10-03 still available?
8218-10-03 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8218-10-03

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026