PartsTable
Technical Data Sheet
Download PDF

8214-SS-0440 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

8214-SS-0440: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: HEXAGON, nut_height: 0.440 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-079-2298, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8214-SS-0440
NSN: 5310-01-079-2298
NIINs: 010792298, 011979433
FSC: 5310 — Nuts and Washers
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleHEXAGON
nut_height0.440 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.250 INCHES NOMINAL IN
nominal_thread_size0.112 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch40
material_document_and_classificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-01-079-2298
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8214-SS-0440 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764,COND FM FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
NUT HEIGHT: 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764,COND FM FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
NUT HEIGHT0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLEHEXAGON
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
582R125H07Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 8214-SS-0440?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8214-SS-0440?
8214-SS-0440 is a NUT,PLAIN,HEXAGON.
What parts can replace 8214-SS-0440?
There is 1 known substitute for 8214-SS-0440: 582R125H07. Substitute compatibility should be verified for your specific system.
What is the NSN for 8214-SS-0440?
8214-SS-0440 is cataloged in the U.S. Government catalog under NSN 5310-01-079-2298. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8214-SS-0440

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.