PartsTable
Technical Data Sheet
Download PDF

8210B38 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8210B38: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR AND CORK OVERALL, outside_diameter: 8.750 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 8.455 INCHES MINIMUM AND 8.465 INCHES MAXIMUM IN, cross-sectional_thickness: 0.079 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-587-7568, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8210B38
NSN: 5330-00-587-7568
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR AND CORK OVERALL
outside_diameter8.750 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter8.455 INCHES MINIMUM AND 8.465 INCHES MAXIMUM IN
cross-sectional_thickness0.079 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationDC-100,FSCM 89762 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-587-7568
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8210B38 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.079 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: DC-100,FSCM 89762 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 8.750 INCHES NOMINAL IN
•
APERTURE DIAMETER: 8.455 INCHES MINIMUM AND 8.465 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR AND CORK OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.079 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONDC-100,FSCM 89762 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER8.750 INCHES NOMINAL IN
APERTURE DIAMETER8.455 INCHES MINIMUM AND 8.465 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR AND CORK OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
P-201-IT 55Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4116-17Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
P-201 ITEM 55Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8210B38?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8210B38?
8210B38 is a GASKET.
What parts can replace 8210B38?
There are 3 known substitutes for 8210B38: P-201-IT 55, 4116-17, P-201 ITEM 55. Substitute compatibility should be verified for your specific system.
What is the NSN for 8210B38?
8210B38 is cataloged in the U.S. Government catalog under NSN 5330-00-587-7568. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8210B38