PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8207-8

8207-8 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RELAY,ELECTROMAGNETIC is a the manufacturer industrial component. Key specifications include DUTY TYPE: CONTINUOUS, OVERALL WIDTH: 2.060 INCHES NOMINAL IN, OVERALL HEIGHT: 2.810 INCHES NOMINAL IN, OVERALL LENGTH: 3.120 INCHES NOMINAL IN, ENVIRONMENTAL PROTECTION: DUSTPROOF, MOUNTING FACILITY PATTERN: RECTANGULAR SINGLE MOUNTING FACILITY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-6968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8207-8
NSN: 5340-00-205-6968
FSC: 5340
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
DUTY TYPECONTINUOUS
COIL QUANTITY1
OVERALL WIDTH2.060 INCHES NOMINAL IN
OVERALL HEIGHT2.810 INCHES NOMINAL IN
OVERALL LENGTH3.120 INCHES NOMINAL IN
WINDING QUANTITY1
ENVIRONMENTAL PROTECTIONDUSTPROOF
MOUNTING FACILITY PATTERNRECTANGULAR SINGLE MOUNTING FACILITY
TERMINAL TYPE AND QUANTITY10 THREADED STUD ALL FUNCTIONS
WINDING DC RESISTANCE RATING45.0 OHMS NOMINAL SINGLE WINDING
UNTHREADED MOUNTING HOLE DIAMETER0.144 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
MOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
NSN5340-00-205-6968
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8207-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 9/16-18 UNF
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 6 SIZE
•
MATERIAL: STEEL
•
OVERALL DIAMETER: 1.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM
•
DESIGN TYPE: THREADED
•
DRIVE TYPE: SERRATED
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SIZE AND SERIES/TYPE DESIGNATOR9/16-18 UNF
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 6 SIZE
MATERIALSTEEL
OVERALL DIAMETER1.000 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM
DESIGN TYPETHREADED
DRIVE TYPESERRATED
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
13216Interchangeable
interchangeable cross-reference
interchangeable
5 5-32X13-16Interchangeable
interchangeable cross-reference
interchangeable
1316559Interchangeable
interchangeable cross-reference
interchangeable
SB6199Interchangeable
interchangeable cross-reference
interchangeable
82B011BZ3-0001Interchangeable
interchangeable cross-reference
interchangeable
82B911AZ3-0028Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8207-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8207-8?
8207-8 is a RELAY,ELECTROMAGNETIC.
What parts can replace 8207-8?
There are 26 known substitutes for 8207-8: 13216, 5 5-32X13-16, 1316559 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8207-8?
8207-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-6968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8207-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026