PartsTable
Technical Data Sheet
PartsTable / O-RING / 820214P
820214P ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, special_features: INSPECT IN ACCORDANCE W/MIL-M-19595, center_hole_diameter: 0.978 INCHES MINIMUM AND 0.990 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-776-7031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
820214P
NSN: 5331-00-776-7031
FSC: 5331 — O-RING
CAGE: 94120 — AQUALUNG USA, INC (USA)
SPECIFICATIONS
materialRUBBER
special_featuresINSPECT IN ACCORDANCE W/MIL-M-19595
center_hole_diameter0.978 INCHES MINIMUM AND 0.990 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-776-7031
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 820214P MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
•
CENTER HOLE DIAMETER: 0.978 INCHES MINIMUM AND 0.990 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER
SPECIAL FEATURESINSPECT IN ACCORDANCE W/MIL-M-19595
CENTER HOLE DIAMETER0.978 INCHES MINIMUM AND 0.990 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
8202-14Interchangeable
interchangeable cross-reference
interchangeable
B-2207-10AInterchangeable
interchangeable cross-reference
interchangeable
8201-12Interchangeable
interchangeable cross-reference
interchangeable
8201-20Interchangeable
interchangeable cross-reference
interchangeable
901010-6-06-1 ITEM NO.10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 820214P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 820214P?
820214P is a O-RING.
What parts can replace 820214P?
There are 5 known substitutes for 820214P: 8202-14, B-2207-10A, 8201-12 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 820214P?
820214P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-776-7031. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 820214P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026