PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8201226
8201226 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.312 INCHES NOMINAL IN, outside_diameter: 2.441 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.443 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-531-2720, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8201226
NSN: 5330-00-531-2720
FSC: 5330
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.312 INCHES NOMINAL IN
outside_diameter2.441 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.443 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.813 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-531-2720
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8201226 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.312 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.813 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.443 INCHES NOMINAL IN
•
MATERIAL: LEATHER SEALING ELEMENT
•
OUTSIDE DIAMETER: 2.441 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.312 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.813 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.443 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT
OUTSIDE DIAMETER2.441 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
CASE STYLESQUARE
SURFACE TREATMENTPLASTIC CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
18039Interchangeable
interchangeable cross-reference
interchangeable
11398Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751 TYCSZ39Interchangeable
interchangeable cross-reference
interchangeable
150 39Interchangeable
interchangeable cross-reference
interchangeable
908145-1Interchangeable
interchangeable cross-reference
interchangeable
6010ECCPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8201226?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8201226?
8201226 is a SEAL,PLAIN ENCASED.
What parts can replace 8201226?
There are 7 known substitutes for 8201226: 18039, 11398, GGG-D-751 TYCSZ39 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8201226?
8201226 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-531-2720. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8201226

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026