The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include body_width: 0.500 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, body_height: 0.150 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN, body_length: 1.290 INCHES MAXIMUM IN, overall_height: 0.345 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN, overall_length: 1.290 INCHES MAXIMUM IN, memory_capacity: UNKNOWN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5962-01-229-4030, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| body_width | 0.500 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN |
| body_height | 0.150 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN |
| body_length | 1.290 INCHES MAXIMUM IN |
| overall_height | 0.345 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN |
| overall_length | 1.290 INCHES MAXIMUM IN |
| memory_capacity | UNKNOWN |
| features_provided | PROGRAMMED |
| output_logic_form | TRANSISTOR-TRANSISTOR LOGIC |
| inclosure_material | CERAMIC |
| memory_device_type | PROM |
| storage_temp_range | -65.0 TO 150.0 CELSIUS DEGC |
| test_data_document | 96906-MIL-STD-883 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| NSN | 5962-01-229-4030 |
| OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS DEGC |
| FEATURES PROVIDED | HERMETICALLY SEALED AND BURN IN AND PROGRAMMABLE AND W/ENABLE |
| MEMORY DEVICE TYPE | ROM |
| TERMINAL SURFACE TREATMENT | SOLDER |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 7.0 VOLTS MAXIMUM POWER SOURCE |
| TERMINAL TYPE AND QUANTITY | 24 PRINTED CIRCUIT |
| TIME RATING PER CHACTERISTIC | 100.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 100.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT NS |
| TEST DATA DOCUMENT | 14933-82009 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CASE OUTLINE SOURCE AND DESIGNATOR | D-3 MIL-M-38510 |