PartsTable / COMPONENT / 82007B
82007B
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.500 INCHES NOMINAL IN, aperture_width: 2.000 INCHES NOMINAL IN, overall_length: 13.000 INCHES NOMINAL IN, aperture_length: 11.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-9283, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
82007B
NSN: 5330-00-297-9283 FSC: 5330 CAGE: 1ML14 — BRINKLEY TECHNOLOGY GROUP LLC DBA HERCULES MANUFACTURING (USA)
SPECIFICATIONS
material PAPER AND GLUE OVERALL hole_diameter 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 3.500 INCHES NOMINAL IN aperture_width 2.000 INCHES NOMINAL IN overall_length 13.000 INCHES NOMINAL IN aperture_length 11.500 INCHES NOMINAL IN style_designator NON-CIRCULAR bolt_hole_quantity 10 inside_corner_radius 1.000 INCHES NOMINAL IN outside_corner_radius 1.750 INCHES NOMINAL IN cross-sectional_thickness 0.031 INCHES NOMINAL IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION NSN 5330-00-297-9283
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 82007B
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE CORNER RADIUS: 1.750 INCHES NOMINAL IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803 F326128-6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
• CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
• INSIDE CORNER RADIUS: 1.000 INCHES NOMINAL IN
• HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CORNER RADIUS 1.750 INCHES NOMINAL IN CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION MATERIAL DOCUMENT AND CLASSIFICATION MIL-G-12803 F326128-6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL BOLT HOLE QUANTITY 10 OVERALL WIDTH 3.500 INCHES NOMINAL IN CROSS-SECTIONAL THICKNESS 0.031 INCHES NOMINAL IN INSIDE CORNER RADIUS 1.000 INCHES NOMINAL IN HOLE DIAMETER 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN MATERIAL PAPER AND GLUE OVERALL OVERALL LENGTH 13.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
SI114-1 Interchangeable interchangeable cross-reference
interchangeable
D15-122KPC381 Interchangeable interchangeable cross-reference
interchangeable
N1866PC124 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 82007B?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 82007B?
82007B is a GASKET.
What parts can replace 82007B?
There are 3 known substitutes for 82007B: SI114-1, D15-122KPC381, N1866PC124. Substitute compatibility should be verified for your specific system.
Is 82007B still available?
82007B is currently cancelled.