PartsTable
Technical Data Sheet
PartsTable / O-RING / 8200-41
8200-41 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,BREATHING APPARATUS is a the manufacturer industrial component. Key specifications include special_features: EXPLOSIVE ORDNANCE DISPOSAL (EOD) TOOLS/EQUIPMENT, criticality_code_justification: FEAT, part_name_assigned_by_controlling_agency: JAW FRAME RETAINER. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-213-8722, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8200-41
NSN: 5331-00-213-8722
FSC: 5331 — O-RING
CAGE: 94120 — AQUALUNG USA, INC (USA)
SPECIFICATIONS
special_featuresEXPLOSIVE ORDNANCE DISPOSAL (EOD) TOOLS/EQUIPMENT
criticality_code_justificationFEAT
part_name_assigned_by_controlling_agencyJAW FRAME RETAINER
NSN5331-00-213-8722
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8200-41 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
CENTER HOLE DIAMETER: 0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 250 MAXIMUM
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
HARDNESS RATING: 65.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
CRITICALITY CODE JUSTIFICATIONFEAT
CENTER HOLE DIAMETER0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONNSN 2320-01-304-2277 PLS (PALLETIZED LOADING SYSTEM)
ELONGATION PERCENTAGE250 MAXIMUM
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SPECIAL FEATURESWEAPON SYSTEM ESSENTIAL
HARDNESS RATING65.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
585514-1Interchangeable
interchangeable cross-reference
interchangeable
AS568-014Interchangeable
interchangeable cross-reference
interchangeable
2-014C147-70Interchangeable
interchangeable cross-reference
interchangeable
7-755-014000Interchangeable
interchangeable cross-reference
interchangeable
5502Interchangeable
IBM 2m Min - Min External SAS Cable
interchangeable
2-014 N674-70Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8200-41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8200-41?
8200-41 is a CLAMP,BREATHING APPARATUS.
What parts can replace 8200-41?
There are 20 known substitutes for 8200-41: 585514-1, AS568-014, 2-014C147-70 and 17 more. Substitute compatibility should be verified for your specific system.
Is 8200-41 still available?
8200-41 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8200-41

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026