PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 82-11-620-17
82-11-620-17 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The STUD,TURNLOCK FASTENER is a the manufacturer industrial component. Key specifications include diameter: 0.375 INCHES NOMINAL IN, material: STEEL OVERALL, drive_type: SLOTTED, grip_length: 0.765 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, securing_device_type: WASHER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-01-302-9513, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
82-11-620-17
NSN: 5325-01-302-9513
FSC: 5325
CAGE: 94222 — SOUTHCO INC (USA)
SPECIFICATIONS
diameter0.375 INCHES NOMINAL IN
materialSTEEL OVERALL
drive_typeSLOTTED
grip_length0.765 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
securing_device_typeWASHER
turnlock_stud_head_styleFILLISTER
stud_shank_major_diameter0.240 INCHES NOMINAL IN
turnlock_stud_shank_styleSTUD SHANK
material_accommodated_thickness0.610 INCHES MINIMUM AND 0.629 INCHES MAXIMUM IN
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5325-01-302-9513
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 82-11-620-17 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
SECURING DEVICE TYPE: WASHER
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
DIAMETER: 0.375 INCHES NOMINAL IN
•
GRIP LENGTH: 0.765 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
DRIVE TYPE: SLOTTED
•
STUD SHANK MAJOR DIAMETER: 0.240 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
SECURING DEVICE TYPEWASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
DIAMETER0.375 INCHES NOMINAL IN
GRIP LENGTH0.765 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
DRIVE TYPESLOTTED
STUD SHANK MAJOR DIAMETER0.240 INCHES NOMINAL IN
TURNLOCK STUD HEAD STYLEFILLISTER
MATERIAL ACCOMMODATED THICKNESS0.610 INCHES MINIMUM AND 0.629 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
748361Interchangeable
interchangeable cross-reference
interchangeable
AS568-232/M3CH714A25B34E016E036Interchangeable
interchangeable cross-reference
interchangeable
3002Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 82-11-620-17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 82-11-620-17?
82-11-620-17 is a STUD,TURNLOCK FASTENER.
What parts can replace 82-11-620-17?
There are 3 known substitutes for 82-11-620-17: 748361, AS568-232/M3CH714A25B34E016E036, 3002. Substitute compatibility should be verified for your specific system.
What is the NSN for 82-11-620-17?
82-11-620-17 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-01-302-9513. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 82-11-620-17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026