PartsTable
Technical Data Sheet
Download PDF

81A5002A1034 — STUD ASSEMBLY,TURNLOCK FASTENER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

81A5002A1034: STUD ASSEMBLY,TURNLOCK FASTENER.

STUD ASSEMBLY,TURNLOCK FASTENER. Key specifications include material: STEEL COMP 302 OR STEEL CORROSION RESISTING STUD, head_length: 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN, eyelet_length: 0.257 INCHES NOMINAL IN, surface_treatment: PASSIVATE OVERALL, stud_assembly_style: STUD ASSEMBLY, eyelet_outside_diameter: 0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-015-7952, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
81A5002A1034
NSN: 5325-00-015-7952
FSC: 5325 — Fastening Devices
CAGE: 01365 — MARINE CORPS SYSTEMS COMMAND DIV MARINE CORPS SYSTEMS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL CORROSION RESISTING STUD
head_length0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
eyelet_length0.257 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
stud_assembly_styleSTUD ASSEMBLY
eyelet_outside_diameter0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
turnlock_stud_head_styleFLAT COUNTERSUNK WING
material_accommodated_thickness0.141 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE HEAD
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
distance_from_engaging_member_to_largest_bearing_surface_of_head0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
NSN5325-00-015-7952
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 81A5002A1034 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HEAD LENGTH: 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
•
EYELET OUTSIDE DIAMETER: 0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.141 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE EYELET
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HEAD LENGTH0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
EYELET OUTSIDE DIAMETER0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
MATERIAL ACCOMMODATED THICKNESS0.141 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE EYELET
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE PIN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE HEAD
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OR TYPE 384,CAGEC 71321 MFR REF SINGLE MATERIAL RESPONSE STUD
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5325 — Fastening Devices
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5325-00-000-1884 5325-00-000-9988 5325-00-001-1567 5325-00-001-2043 5325-00-001-3842 5325-00-001-3858 5325-00-001-3871 5325-00-001-4317
SUBSTITUTES & CROSS-REFERENCES 1
2320059-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 81A5002A1034?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 81A5002A1034?
81A5002A1034 is a STUD ASSEMBLY,TURNLOCK FASTENER.
What parts can replace 81A5002A1034?
There is 1 known substitute for 81A5002A1034: 2320059-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 81A5002A1034?
81A5002A1034 is cataloged in the U.S. Government catalog under NSN 5325-00-015-7952. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 81A5002A1034

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.