PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8198-2
8198-2 ✓ Verified by PartsTable
3M · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The perfect way to get your message noticed, these self-adhesive, removable coloured notes have revolutionised home, school and office communication. Available in a wide variety of colours and designs, use them to organise your information, wherever you are. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-393-4043, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8198-2
NSN: 5310-00-393-4043
FSC: 5310
CAGE: 30418 — THOR POWER TOOL CO SUB OF STEWART-WARNER CO (USA)
SPECIFICATIONS
bearingsINCLUDED
materialALUMINUM ALLOY OVERALL
bore_typeSTRAIGHT
face_width0.4970 INCHES MINIMUM AND 0.5070 INCHES MAXIMUM IN
bore_length0.595 INCHES NOMINAL IN
design_formPLAIN
bearing_typeSLEEVE
bore_featureINCLUDED
groove_depth0.500 INCHES NOMINAL IN
groove_shapeU
groove_width0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
bore_diameter0.313 INCHES NOMINAL IN
NSN5310-00-393-4043
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8198-2 · 3M ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.813 INCHES MINIMUM AND 0.823 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.094 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
HOLE DIAMETER0.813 INCHES MINIMUM AND 0.823 INCHES MAXIMUM IN
MATERIAL THICKNESS0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.094 INCHES NOMINAL IN
OVERALL HEIGHT0.064 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
8198-2Interchangeable
interchangeable cross-reference
interchangeable
UTX210Interchangeable
interchangeable cross-reference
interchangeable
7118198-2Interchangeable
interchangeable cross-reference
interchangeable
70400-00512Interchangeable
interchangeable cross-reference
interchangeable
70400-00512-102Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8198-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8198-2?
8198-2 is a SEMICONDUCTOR DEVICE,DIODE manufactured by 3M.
What parts can replace 8198-2?
There are 5 known substitutes for 8198-2: 8198-2, UTX210, 7118198-2 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8198-2?
8198-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-393-4043. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8198-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026