PartsTable
Technical Data Sheet
Download PDF

8196930 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8196930: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 3.355 INCHES MINIMUM AND 3.419 INCHES MAXIMUM IN, center_hole_diameter: 3.085 INCHES MINIMUM AND 3.133 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-203-6828, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8196930
NSN: 5331-01-203-6828
FSC: 5331 — O-ring
CAGE: A4249 — IVECO DEFENCE VEHICLES S.P.A. (ITA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter3.355 INCHES MINIMUM AND 3.419 INCHES MAXIMUM IN
center_hole_diameter3.085 INCHES MINIMUM AND 3.133 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-01-203-6828
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8196930 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 3.355 INCHES MINIMUM AND 3.419 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
CENTER HOLE DIAMETER: 3.085 INCHES MINIMUM AND 3.133 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER3.355 INCHES MINIMUM AND 3.419 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE331 MAXIMUM
CENTER HOLE DIAMETER3.085 INCHES MINIMUM AND 3.133 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
OR-235Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
756055Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
819630Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
CM1-235-B46AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2-235 N674-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
01-425-0366-4 PIECE 31Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 8196930?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8196930?
8196930 is a O-RING.
What parts can replace 8196930?
There are 8 known substitutes for 8196930: OR-235, 756055, 819630 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8196930?
8196930 is cataloged in the U.S. Government catalog under NSN 5331-01-203-6828. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8196930