PartsTable
Technical Data Sheet
Download PDF

8196892-1 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8196892-1: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 5.175 INCHES NOMINAL IN, length: 5.780 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061, corner_radius: 0.560 INCHES NOMINAL IN, body_thickness: 1.125 INCHES NOMINAL IN, flange_thickness: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-567-5225, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8196892-1
NSN: 5340-01-567-5225
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width5.175 INCHES NOMINAL IN
length5.780 INCHES NOMINAL IN
materialALUMINUM ALLOY 6061
corner_radius0.560 INCHES NOMINAL IN
body_thickness1.125 INCHES NOMINAL IN
flange_thickness0.250 INCHES NOMINAL IN
special_featuresHAS GASKET GROOVES FOR WATERTIGHT SEAL
surface_treatmentANODIZE AND PAINT
securing_device_typeTHREADED FASTENER
peripheral_shape_styleRECTANGLE, MULTI HOLES
end_item_identificationCAPTURE SPINE
hole_quantity_along_width3
NSN5340-01-567-5225
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8196892-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 4.559 INCHES NOMINAL IN
•
CORNER RADIUS: 0.560 INCHES NOMINAL IN
•
LENGTH: 5.780 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 2.735 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.250 INCHES NOMINAL IN
•
HOLE QUANTITY ALONG LENGTH: 3
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 2.432 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT, ROUND RIB REINFORCED
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH4.559 INCHES NOMINAL IN
CORNER RADIUS0.560 INCHES NOMINAL IN
LENGTH5.780 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG LENGTH2.735 INCHES NOMINAL IN
FLANGE THICKNESS0.250 INCHES NOMINAL IN
HOLE QUANTITY ALONG LENGTH3
DISTANCE BETWEEN HOLES ALONG WIDTH2.432 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT, ROUND RIB REINFORCED
SECURING DEVICE TYPETHREADED FASTENER
HOLE QUANTITY ALONG WIDTH3
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8196892-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8196892-1?
8196892-1 is a COVER,ACCESS.
What is the NSN for 8196892-1?
8196892-1 is cataloged in the U.S. Government catalog under NSN 5340-01-567-5225. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8196892-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.