PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 819016
819016 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ADAPTER,TORQUE WRENCH is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_angle: 15.0 DEGREES NOMINAL, drive_end_shape: DOVETAIL SINGLE END INTERNAL, torque_capacity: 3000.0 INCH-POUNDS MAXIMUM IN, style_designator: OPEN END, wrenching_surface_size: 1.250 INCHES NOMINAL SINGLE END IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-759-2714, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
819016
NSN: 5340-00-759-2714
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
head_angle15.0 DEGREES NOMINAL
drive_end_shapeDOVETAIL SINGLE END INTERNAL
torque_capacity3000.0 INCH-POUNDS MAXIMUM IN
style_designatorOPEN END
wrenching_surface_size1.250 INCHES NOMINAL SINGLE END IN
end_item_identificationSTURTEVANT-RICHMONT TYPE CCM AND LTC TORQUE WRENCHES
wrenching_surface_shapeOVAL SINGLE END INTERNAL
drive_end_outside_diameter1.250 INCHES NOMINAL IN
wrenching_end_head_thickness0.500 INCHES NOMINAL IN
wrenching_end_outside_diameter2.750 INCHES NOMINAL IN
NSN5340-00-759-2714
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 819016 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.062 INCHES MINIMUM AND 2.094 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 302 OVERALL
•
DISTANCE FROM LOOP CENTER TO END: 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH2.062 INCHES MINIMUM AND 2.094 INCHES MAXIMUM IN
MATERIALSTEEL COMP 302 OVERALL
DISTANCE FROM LOOP CENTER TO END1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
548071G0002Interchangeable
interchangeable cross-reference
interchangeable
MY5353Interchangeable
interchangeable cross-reference
interchangeable
294-990060-809Interchangeable
interchangeable cross-reference
interchangeable
535-0054Interchangeable
interchangeable cross-reference
interchangeable
2100-2867Interchangeable
interchangeable cross-reference
interchangeable
535-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 819016?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 819016?
819016 is a ADAPTER,TORQUE WRENCH.
What parts can replace 819016?
There are 26 known substitutes for 819016: 548071G0002, MY5353, 294-990060-809 and 23 more. Substitute compatibility should be verified for your specific system.
Is 819016 still available?
819016 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 819016

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026