PartsTable
Technical Data Sheet
Download PDF

81887 — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

81887: CAPACITOR,FIXED,CERAMIC DIELECTR.

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include overall_length: 0.1540 INCHES MINIMUM AND 0.1640 INCHES MAXIMUM IN, special_features: INTERNAL FLANGE LEFT END AND CENTER, body_outside_diameter: 0.7750 INCHES MINIMUM AND 0.7800 INCHES MAXIMUM IN, interior_flange_hole_diameter: 0.6320 INCHES MINIMUM AND 0.6370 INCHES MAXIMUM IN, left_internal_flange_hole_diameter: 0.5630 INCHES MINIMUM AND 0.5680 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-888-6630, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
81887
NSN: 3120-00-888-6630
NIINs: 008886630, 009117337
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 78640 — MITSUBISHI CATERPILLAR FORKLIFT AMERICA, INC (USA)
SPECIFICATIONS
overall_length0.1540 INCHES MINIMUM AND 0.1640 INCHES MAXIMUM IN
special_featuresINTERNAL FLANGE LEFT END AND CENTER
body_outside_diameter0.7750 INCHES MINIMUM AND 0.7800 INCHES MAXIMUM IN
interior_flange_hole_diameter0.6320 INCHES MINIMUM AND 0.6370 INCHES MAXIMUM IN
left_internal_flange_hole_diameter0.5630 INCHES MINIMUM AND 0.5680 INCHES MAXIMUM IN
NSN3120-00-888-6630
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 81887 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERIOR FLANGE HOLE DIAMETER: 0.6320 INCHES MINIMUM AND 0.6370 INCHES MAXIMUM IN
•
LEFT INTERNAL FLANGE HOLE DIAMETER: 0.5630 INCHES MINIMUM AND 0.5680 INCHES MAXIMUM IN
•
BODY OUTSIDE DIAMETER: 0.7750 INCHES MINIMUM AND 0.7800 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
INTERIOR FLANGE HOLE DIAMETER0.6320 INCHES MINIMUM AND 0.6370 INCHES MAXIMUM IN
LEFT INTERNAL FLANGE HOLE DIAMETER0.5630 INCHES MINIMUM AND 0.5680 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER0.7750 INCHES MINIMUM AND 0.7800 INCHES MAXIMUM IN
OVERALL LENGTH0.1540 INCHES MINIMUM AND 0.1640 INCHES MAXIMUM IN
SPECIAL FEATURESINTERNAL FLANGE LEFT END AND CENTER
SUBSTITUTES & CROSS-REFERENCES 7
1928021Reference document
Same NSN cross-reference
Reference document — Secondary reference
DY1928021Reference document
Same NSN cross-reference
Reference document — Secondary reference
236082Reference document
Same NSN cross-reference
Reference document — Secondary reference
3120008886630Reference document
Same NSN cross-reference
Reference document — Secondary reference
3613Reference document
Same NSN cross-reference
Reference document — Secondary reference
47381Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 81887?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 81887?
81887 is a CAPACITOR,FIXED,CERAMIC DIELECTR.
What parts can replace 81887?
There are 7 known substitutes for 81887: 1928021, DY1928021, 236082 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 81887?
81887 is cataloged in the U.S. Government catalog under NSN 3120-00-888-6630. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 81887