PartsTable / COMPONENT / 8176390
8176390
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-3626, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
8176390
NSN: 5340-00-290-3626 FSC: 5340 CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
diameter 0.203 INCHES NOMINAL IN material PLASTIC BAND overall_width 0.500 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.060 INCHES NOMINAL IN loop_inside_diameter 0.750 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 0.986125 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.783 INCHES NOMINAL IN NSN 5340-00-290-3626
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 8176390
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• LOOP INSIDE DIAMETER: 0.750 INCHES NOMINAL IN
• STYLE DESIGNATOR: SINGLE LOOP
• DISTANCE FROM LOOP CENTER TO TONGUE END: 0.986125 INCHES NOMINAL IN
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.783 INCHES NOMINAL IN
• MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
• TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER 0.750 INCHES NOMINAL IN STYLE DESIGNATOR SINGLE LOOP MATERIAL PLASTIC BAND DISTANCE FROM LOOP CENTER TO TONGUE END 0.986125 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.783 INCHES NOMINAL IN MATERIAL THICKNESS 0.060 INCHES NOMINAL IN TONGUE HOLE TYPE ROUND, UNTHREADED OVERALL WIDTH 0.500 INCHES NOMINAL IN DIAMETER 0.203 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
PP7054U Upgraded Successor successor cross-reference
successor
841 Upgraded Successor successor cross-reference
successor
45098-2 Upgraded Successor successor cross-reference
successor
X18150-18 Upgraded Successor successor cross-reference
successor
841-15788 Interchangeable interchangeable cross-reference
interchangeable
A997CPC30A Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 8176390?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8176390?
8176390 is a CLAMP,LOOP.
What parts can replace 8176390?
There are 18 known substitutes for 8176390: PP7054U, 841, 45098-2 and 15 more. Substitute compatibility should be verified for your specific system.
Is 8176390 still available?
8176390 is currently cancelled.
Request a Quote — 8176390