PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8176389
8176389 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-0759, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8176389
NSN: 5340-00-290-0759
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.688 INCHES NOMINAL IN
material_document_and_classificationF-10001,E I DUPONT DE NEMOURS AND CO INC MFR REF SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.955 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.752 INCHES NOMINAL IN
NSN5340-00-290-0759
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8176389 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.955 INCHES NOMINAL IN
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.688 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL DOCUMENT AND CLASSIFICATION: F-10001,E I DUPONT DE NEMOURS AND CO INC MFR REF SINGLE MATERIAL RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.955 INCHES NOMINAL IN
DIAMETER0.203 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.688 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONF-10001,E I DUPONT DE NEMOURS AND CO INC MFR REF SINGLE MATERIAL RESPONSE BAND
MATERIALPLASTIC POLYAMIDE NYLON BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.752 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
1228Z52Interchangeable
interchangeable cross-reference
interchangeable
UC1306TAMInterchangeable
interchangeable cross-reference
interchangeable
202710Interchangeable
interchangeable cross-reference
interchangeable
1-1166Interchangeable
interchangeable cross-reference
interchangeable
CA8079-15 INCONEL 625Interchangeable
interchangeable cross-reference
interchangeable
CA8079-15 INC0NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8176389?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8176389?
8176389 is a CLAMP,LOOP.
What parts can replace 8176389?
There are 13 known substitutes for 8176389: 1228Z52, UC1306TAM, 202710 and 10 more. Substitute compatibility should be verified for your specific system.
Is 8176389 still available?
8176389 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8176389

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026