PartsTable / O-RING / 817565
817565
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.492 INCHES MINIMUM AND 1.532 INCHES MAXIMUM IN, center_hole_diameter: 1.228 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-584-0263, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
817565
NSN: 5331-00-584-0263 FSC: 5331 — O-RINGCAGE: 49185 — TEREX AMERICAN CRANE CORP (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR outside_diameter 1.492 INCHES MINIMUM AND 1.532 INCHES MAXIMUM IN center_hole_diameter 1.228 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN cross-sectional_height 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN NSN 5331-00-584-0263
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 817565
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 1.228 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• OUTSIDE DIAMETER: 1.492 INCHES MINIMUM AND 1.532 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN CENTER HOLE DIAMETER 1.228 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OUTSIDE DIAMETER 1.492 INCHES MINIMUM AND 1.532 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
123 Interchangeable interchangeable cross-reference
interchangeable
S-123 Interchangeable interchangeable cross-reference
interchangeable
M83248/1-126 Interchangeable interchangeable cross-reference
interchangeable
576C384P126 Interchangeable interchangeable cross-reference
interchangeable
1PS1 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 817565?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 817565?
817565 is a O-RING.
What parts can replace 817565?
There are 27 known substitutes for 817565: 123, S-123, M83248/1-126 and 24 more. Substitute compatibility should be verified for your specific system.
Is 817565 still available?
817565 is currently cancelled.