PartsTable
Technical Data Sheet
Download PDF

8173942 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8173942: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, center_hole_diameter: 10.742 INCHES MINIMUM AND 10.772 INCHES MAXIMUM IN, cross-sectional_height: 0.201 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, cross-sectional_shape_style: O-RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-569-5956, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8173942
NSN: 5330-00-569-5956
FSC: 5330 — Packing and Gasket Materials
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
center_hole_diameter10.742 INCHES MINIMUM AND 10.772 INCHES MAXIMUM IN
cross-sectional_height0.201 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
cross-sectional_shape_styleO-RING
NSN5330-00-569-5956
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8173942 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.201 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
CENTER HOLE DIAMETER: 10.742 INCHES MINIMUM AND 10.772 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 18876-8173942 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.201 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEO-RING
CENTER HOLE DIAMETER10.742 INCHES MINIMUM AND 10.772 INCHES MAXIMUM IN
TEST DATA DOCUMENT18876-8173942 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
MATERIALRUBBER SILICONE CLASS Q OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 8173942?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8173942?
8173942 is a PACKING,PREFORMED.
What is the NSN for 8173942?
8173942 is cataloged in the U.S. Government catalog under NSN 5330-00-569-5956. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8173942