Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.128 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.000 INCHES NOMINAL IN, overall_length: 1.000 INCHES NOMINAL IN, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL, style_designator: NON-CIRCULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2389, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
8169203
NSN:5330-00-641-2389 FSC:5330 CAGE:18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
material
RUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter
0.128 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
1.000 INCHES NOMINAL IN
overall_length
1.000 INCHES NOMINAL IN
hardness_rating
45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designator
NON-CIRCULAR
aperture_diameter
0.625 INCHES NOMINAL IN
bolt_hole_quantity
4
outside_corner_radius
0.141 INCHES NOMINAL IN
cross-sectional_thickness
0.031 INCHES NOMINAL IN
cross-sectional_shape_style
SOLID SINGLE OR COMPOSITION
material_document_and_classification
MIL-G-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN
5330-00-641-2389
COMPONENT DIAGRAM
KEY FEATURES
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.141 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 0.719 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 4
•
APERTURE DIAMETER: 0.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.719 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.141 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH
0.141 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
0.719 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY
4
APERTURE DIAMETER
0.625 INCHES NOMINAL IN
OVERALL LENGTH
1.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
0.719 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH