PartsTable
Technical Data Sheet
8168778 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SNAP HOOK is a the manufacturer industrial component. Key specifications include material: IRON HOOK, design_type: FIXED, end_position: CONNECTION END AT RIGHT ANGLE TO PLANE OF HOOK END, overall_length: 3.025 INCHES NOMINAL IN, inside_diameter: 0.563 INCHES NOMINAL IN, unattached_ring: NOT INCLUDED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-682-1935, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8168778
NSN: 5340-00-682-1935
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialIRON HOOK
design_typeFIXED
end_positionCONNECTION END AT RIGHT ANGLE TO PLANE OF HOOK END
overall_length3.025 INCHES NOMINAL IN
inside_diameter0.563 INCHES NOMINAL IN
unattached_ringNOT INCLUDED
special_featuresEYE STYLE CONNECTION END NO. 1
end_connection_styleROUND EYE
hook_style_designatorSLIDING BOLT
rubber_covered_featureNOT INCLUDED
NSN5340-00-682-1935
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8168778 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: IRON HOOK
HOOK STYLE DESIGNATOR: SLIDING BOLT
UNATTACHED RING: NOT INCLUDED
RUBBER COVERED FEATURE: NOT INCLUDED
DESIGN TYPE: FIXED
END POSITION: CONNECTION END AT RIGHT ANGLE TO PLANE OF HOOK END
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALIRON HOOK
MATERIALIRON CONNECTION END
HOOK STYLE DESIGNATORSLIDING BOLT
UNATTACHED RINGNOT INCLUDED
RUBBER COVERED FEATURENOT INCLUDED
SPECIAL FEATURESEYE STYLE CONNECTION END NO. 1
DESIGN TYPEFIXED
END POSITIONCONNECTION END AT RIGHT ANGLE TO PLANE OF HOOK END
END CONNECTION STYLEROUND EYE
OVERALL LENGTH3.025 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
125-12Upgraded Successor
successor cross-reference
successor
131-309-3Interchangeable
interchangeable cross-reference
interchangeable
ST293Interchangeable
interchangeable cross-reference
interchangeable
1M130-1Interchangeable
interchangeable cross-reference
interchangeable
B3221-16Interchangeable
interchangeable cross-reference
interchangeable
135-1214Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8168778?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8168778?
8168778 is a SNAP HOOK.
What parts can replace 8168778?
There are 13 known substitutes for 8168778: 125-12, 131-309-3, ST293 and 10 more. Substitute compatibility should be verified for your specific system.
Is 8168778 still available?
8168778 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8168778