PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8168390
8168390 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.785 INCHES MINIMUM AND 0.800 INCHES MAXIMUM IN, length: 1.391 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.141 INCHES NOMINAL IN, overall_height: 0.406 INCHES NOMINAL IN, material_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-698-3419, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8168390
NSN: 5340-00-698-3419
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
width0.785 INCHES MINIMUM AND 0.800 INCHES MAXIMUM IN
length1.391 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.141 INCHES NOMINAL IN
overall_height0.406 INCHES NOMINAL IN
material_thickness0.031 INCHES NOMINAL IN
loop/holding_dimension0.375 INCHES NOMINAL IN
NSN5340-00-698-3419
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8168390 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.375 INCHES NOMINAL IN
•
LENGTH: 1.391 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.141 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
WIDTH: 0.785 INCHES MINIMUM AND 0.800 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.375 INCHES NOMINAL IN
OVERALL HEIGHT0.406 INCHES NOMINAL IN
LENGTH1.391 INCHES NOMINAL IN
HOLE DIAMETER0.141 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
WIDTH0.785 INCHES MINIMUM AND 0.800 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
23-7080Interchangeable
interchangeable cross-reference
interchangeable
J301-82AInterchangeable
interchangeable cross-reference
interchangeable
9140-0238Interchangeable
interchangeable cross-reference
interchangeable
227MR1P1Interchangeable
interchangeable cross-reference
interchangeable
950026-0010-000Interchangeable
interchangeable cross-reference
interchangeable
15822Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8168390?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8168390?
8168390 is a CLIP,SPRING TENSION.
What parts can replace 8168390?
There are 12 known substitutes for 8168390: 23-7080, J301-82A, 9140-0238 and 9 more. Substitute compatibility should be verified for your specific system.
Is 8168390 still available?
8168390 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8168390

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026