PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8168202
8168202 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.173 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, lug_width: 0.500 INCHES NOMINAL IN, overall_width: 0.625 INCHES NOMINAL IN, style_designator: LEFT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-327-1788, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8168202
NSN: 5340-00-327-1788
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
diameter0.173 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
lug_width0.500 INCHES NOMINAL IN
overall_width0.625 INCHES NOMINAL IN
style_designatorLEFT HAND CLAMP & BRACKET
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.173 INCHES NOMINAL IN
material_thickness0.051 INCHES NOMINAL IN
loop_inside_diameter0.500 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.922 INCHES NOMINAL IN
distance_from_outer_edge_of_lug_to_hole_center0.234 INCHES NOMINAL IN
NSN5340-00-327-1788
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8168202 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER: 0.234 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEFT HAND CLAMP & BRACKET
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
LOOP INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.625 INCHES NOMINAL IN
LUG WIDTH0.500 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE BAND
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER0.234 INCHES NOMINAL IN
STYLE DESIGNATORLEFT HAND CLAMP & BRACKET
TONGUE HOLE TYPEROUND, UNTHREADED
LOOP INSIDE DIAMETER0.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE0.703 INCHES NOMINAL IN
LUG HOLE DIAMETER0.173 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
7398Interchangeable
interchangeable cross-reference
interchangeable
KD525A12Interchangeable
interchangeable cross-reference
interchangeable
525-0101Interchangeable
interchangeable cross-reference
interchangeable
SM-D-414454Interchangeable
interchangeable cross-reference
interchangeable
A6016Interchangeable
interchangeable cross-reference
interchangeable
CF1CXX01XInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8168202?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8168202?
8168202 is a CLAMP,LOOP.
What parts can replace 8168202?
There are 9 known substitutes for 8168202: 7398, KD525A12, 525-0101 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8168202?
8168202 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-327-1788. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8168202

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026