PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8168113
8168113 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, overall_height: 0.250 INCHES NOMINAL IN, style_designator: ROUND TOP, fastening_device_size: NO. 6-32 MACHINE SCREWS, fastening_device_type: MACHINE SCREW, material_hardness_rating: 40.0 DUROMETER MINIMUM AND 50.0 DUROMETER MAXIMUM.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-510-8875, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8168113
NSN: 5340-00-510-8875
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
overall_height0.250 INCHES NOMINAL IN
style_designatorROUND TOP
fastening_device_sizeNO. 6-32 MACHINE SCREWS
fastening_device_typeMACHINE SCREW
material_hardness_rating40.0 DUROMETER MINIMUM AND 50.0 DUROMETER MAXIMUM
outside/top_flange_diameter0.500 INCHES NOMINAL IN
NSN5340-00-510-8875
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8168113 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENING DEVICE TYPE: MACHINE SCREW
•
MATERIAL: RUBBER SYNTHETIC
•
MATERIAL HARDNESS RATING: 40.0 DUROMETER MINIMUM AND 50.0 DUROMETER MAXIMUM
•
STYLE DESIGNATOR: ROUND TOP
•
OUTSIDE/TOP FLANGE DIAMETER: 0.500 INCHES NOMINAL IN
•
FASTENING DEVICE SIZE: NO. 6-32 MACHINE SCREWS
TECHNICAL CHARACTERISTICS (FLIS)
FASTENING DEVICE TYPEMACHINE SCREW
MATERIALRUBBER SYNTHETIC
MATERIAL HARDNESS RATING40.0 DUROMETER MINIMUM AND 50.0 DUROMETER MAXIMUM
STYLE DESIGNATORROUND TOP
OUTSIDE/TOP FLANGE DIAMETER0.500 INCHES NOMINAL IN
FASTENING DEVICE SIZENO. 6-32 MACHINE SCREWS
OVERALL HEIGHT0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
6313Interchangeable
interchangeable cross-reference
interchangeable
14U1036PCDA6313Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-2692Interchangeable
interchangeable cross-reference
interchangeable
063131Interchangeable
interchangeable cross-reference
interchangeable
46B158Interchangeable
interchangeable cross-reference
interchangeable
M6313Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8168113?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8168113?
8168113 is a BUMPER.
What parts can replace 8168113?
There are 14 known substitutes for 8168113: 6313, 14U1036PCDA6313, MIL-F-2692 and 11 more. Substitute compatibility should be verified for your specific system.
Is 8168113 still available?
8168113 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8168113

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026