8167115: GASKET.
The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC AND CORK OVERALL, hole_diameter: 0.246 INCHES MINIMUM AND 0.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN, overall_length: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.
Government catalog under NSN 5330-00-571-2497, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | RUBBER SYNTHETIC AND CORK OVERALL |
| hole_diameter | 0.246 INCHES MINIMUM AND 0.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| overall_width | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN |
| overall_length | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN |
| hardness_rating | 45.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL |
| style_designator | NON-CIRCULAR |
| aperture_diameter | 0.906 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN |
| bolt_hole_quantity | 4 |
| cross-sectional_thickness | 0.031 INCHES NOMINAL IN |
| cross-sectional_shape_style | SOLID SINGLE OR COMPOSITION |
| material_document_and_classification | MIL-C-6183 MIL SPEC ALL MATERIAL RESPONSES OVERALL |
| outside_edge_to_bolt_hole_center_distance_along_width | 0.375 INCHES NOMINAL IN |
| NSN | 5330-00-571-2497 |
| CROSS-SECTIONAL THICKNESS | 0.031 INCHES NOMINAL IN |
| HARDNESS RATING | 45.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL |
| STYLE DESIGNATOR | NON-CIRCULAR |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-C-6183 MIL SPEC ALL MATERIAL RESPONSES OVERALL |
| OVERALL LENGTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN |
| CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| OVERALL WIDTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN |
| APERTURE DIAMETER | 0.906 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN |
| BOLT HOLE QUANTITY | 4 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN |
No substitute or cross-reference records for this part.