PartsTable
Technical Data Sheet
Download PDF

8154SS0440-7 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

8154SS0440-7: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: ROUND, nut_diameter: 0.250 INCHES NOMINAL IN, thread_class: 2B, nut_thickness: 0.375 INCHES NOMINAL IN, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-007-6197, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8154SS0440-7
NSN: 5310-00-007-6197
FSC: 5310 — Nuts and Washers
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleROUND
nut_diameter0.250 INCHES NOMINAL IN
thread_class2B
nut_thickness0.375 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.112 INCHES IN
thread_quantity_per_inch40
material_document_and_classificationQQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-007-6197
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8154SS0440-7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
NUT DIAMETER: 0.250 INCHES NOMINAL IN
•
NUT THICKNESS: 0.375 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
NUT DIAMETER0.250 INCHES NOMINAL IN
NUT THICKNESS0.375 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLEROUND
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 3
151581-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
211-0052Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HY512-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8154SS0440-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8154SS0440-7?
8154SS0440-7 is a NUT,PLAIN,ROUND.
What parts can replace 8154SS0440-7?
There are 3 known substitutes for 8154SS0440-7: 151581-5, 211-0052, HY512-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 8154SS0440-7?
8154SS0440-7 is cataloged in the U.S. Government catalog under NSN 5310-00-007-6197. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8154SS0440-7