PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 81547
81547 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include drum_width: 13.48 INCHES NOMINAL IN, design_type: WIRE ROPE, drum_surface_design: PLAIN, drum_flange_diameter: 8.24 INCHES NOMINAL IN, end_item_identification: 2355-01-641-2096; MINE RESISTANT VEHICLE, part_name_assigned_by_controlling_agency: DRUM, WINCH KIT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-3232, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
81547
NSN: 3110-00-554-3232
FSC: 3110
CAGE: 52304 — DANA COMMERCIAL VEHICLE PRODUCTS, LLC (USA)
SPECIFICATIONS
drum_width13.48 INCHES NOMINAL IN
design_typeWIRE ROPE
drum_surface_designPLAIN
drum_flange_diameter8.24 INCHES NOMINAL IN
end_item_identification2355-01-641-2096; MINE RESISTANT VEHICLE
part_name_assigned_by_controlling_agencyDRUM, WINCH KIT
next_higher_assembly_identification_designator3819149 AND 3915272
NSN3110-00-554-3232
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 81547 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
RETAINER FABRICATION METHOD: PRESSED
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
RETAINER FABRICATION METHODPRESSED
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
OVERALL OUTSIDE DIAMETER47.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
BRG96Interchangeable
interchangeable cross-reference
interchangeable
BAG96Interchangeable
interchangeable cross-reference
interchangeable
64-1104Interchangeable
interchangeable cross-reference
interchangeable
A10-4Interchangeable
interchangeable cross-reference
interchangeable
SAM210PC6Interchangeable
interchangeable cross-reference
interchangeable
27466Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 81547?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 81547?
81547 is a RESISTOR,FIXED,WIRE WOUND,INDUCT.
What parts can replace 81547?
There are 33 known substitutes for 81547: BRG96, BAG96, 64-1104 and 30 more. Substitute compatibility should be verified for your specific system.
Is 81547 still available?
81547 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 81547

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026