PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 815155-9
815155-9 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC ETHYL CELLULOSE OVERALL, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.063 INCHES NOMINAL IN, loop_inside_diameter: 0.563 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-050-7624, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
815155-9
NSN: 5340-00-050-7624
FSC: 5340
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialPLASTIC ETHYL CELLULOSE OVERALL
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.063 INCHES NOMINAL IN
loop_inside_diameter0.563 INCHES NOMINAL IN
material_document_and_classificationASTM D787 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.843 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.625 INCHES NOMINAL IN
NSN5340-00-050-7624
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 815155-9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.625 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.843 INCHES NOMINAL IN
•
MATERIAL: PLASTIC ETHYL CELLULOSE OVERALL
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D787 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: SINGLE LOOP
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.625 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.843 INCHES NOMINAL IN
MATERIALPLASTIC ETHYL CELLULOSE OVERALL
DIAMETER0.204 INCHES NOMINAL IN
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D787 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORSINGLE LOOP
LOOP INSIDE DIAMETER0.563 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
E5M9-1Interchangeable
interchangeable cross-reference
interchangeable
E9Interchangeable
interchangeable cross-reference
interchangeable
E9EInterchangeable
interchangeable cross-reference
interchangeable
CD821122IT12Interchangeable
interchangeable cross-reference
interchangeable
622-2Interchangeable
interchangeable cross-reference
interchangeable
179228Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 815155-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 815155-9?
815155-9 is a CLAMP,LOOP.
What parts can replace 815155-9?
There are 15 known substitutes for 815155-9: E5M9-1, E9, E9E and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 815155-9?
815155-9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-050-7624. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 815155-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026