PartsTable
Technical Data Sheet
Download PDF

815150 — CLAMP,HOSE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

815150: CLAMP,HOSE.

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.297 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.500 INCHES NOMINAL IN, aperture_width: 3.188 INCHES NOMINAL IN, overall_length: 10.750 INCHES NOMINAL IN, aperture_length: 9.438 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-008-5878, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
815150
NSN: 5330-00-008-5878
NIINs: 000085878, 014745147
FSC: 5330 — Packing and Gasket Materials
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.297 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.500 INCHES NOMINAL IN
aperture_width3.188 INCHES NOMINAL IN
overall_length10.750 INCHES NOMINAL IN
aperture_length9.438 INCHES NOMINAL IN
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
bolt_hole_quantity16
inside_corner_radius0.250 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-008-5878
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 815150 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BC620 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.250 INCHES NOMINAL IN
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BC620 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH10.750 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.500 INCHES NOMINAL IN
APERTURE WIDTH3.188 INCHES NOMINAL IN
APERTURE LENGTH9.438 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 815150?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 815150?
815150 is a CLAMP,HOSE.
What is the NSN for 815150?
815150 is cataloged in the U.S. Government catalog under NSN 5330-00-008-5878. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 815150

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.