PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 813671-77-1
813671-77-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GLIDE,FURNITURE is a the manufacturer industrial component. Key specifications include overall_length: 1.250 INCHES NOMINAL IN, overall_diameter: 9.985 INCHES MINIMUM AND 10.015 INCHES MAXIMUM IN, special_features: COMPRESSED AIR INTAKEON SIDE,THD HOLE 1/4 NPT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-125-6572, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
813671-77-1
NSN: 5340-01-125-6572
FSC: 5340
CAGE: 97592 — PNEUMAFIL CORPORATION (USA)
SPECIFICATIONS
overall_length1.250 INCHES NOMINAL IN
overall_diameter9.985 INCHES MINIMUM AND 10.015 INCHES MAXIMUM IN
special_featuresCOMPRESSED AIR INTAKEON SIDE,THD HOLE 1/4 NPT
NSN5340-01-125-6572
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 813671-77-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 9.985 INCHES MINIMUM AND 10.015 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER9.985 INCHES MINIMUM AND 10.015 INCHES MAXIMUM IN
SPECIAL FEATURESCOMPRESSED AIR INTAKEON SIDE,THD HOLE 1/4 NPT
OVERALL LENGTH1.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
149541Interchangeable
interchangeable cross-reference
interchangeable
TB17BInterchangeable
interchangeable cross-reference
interchangeable
64AX73Interchangeable
interchangeable cross-reference
interchangeable
30094Interchangeable
interchangeable cross-reference
interchangeable
D16089Interchangeable
interchangeable cross-reference
interchangeable
30094-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 813671-77-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 813671-77-1?
813671-77-1 is a GLIDE,FURNITURE.
What parts can replace 813671-77-1?
There are 14 known substitutes for 813671-77-1: 149541, TB17B, 64AX73 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 813671-77-1?
813671-77-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-125-6572. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 813671-77-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026