813371-1: PACKING ASSEMBLY.
The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 0.250 INCHES NOMINAL IN, material: PLASTIC POLYTETRAFLUOROETHYLENE BOTTOM RING, inside_diameter: 0.379 INCHES NOMINAL IN, outside_diameter: 0.437 INCHES NOMINAL IN, special_features: RINGS HAVE SCARF CUT AT 15 DEG PLUS 0 DEG OR MINUS 3 DEG, peripheral_diameter: 0.388 INCHES MINIMUM AND 0.402 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5330-01-498-1464, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| height | 0.250 INCHES NOMINAL IN |
| material | PLASTIC POLYTETRAFLUOROETHYLENE BOTTOM RING |
| inside_diameter | 0.379 INCHES NOMINAL IN |
| outside_diameter | 0.437 INCHES NOMINAL IN |
| special_features | RINGS HAVE SCARF CUT AT 15 DEG PLUS 0 DEG OR MINUS 3 DEG |
| peripheral_diameter | 0.388 INCHES MINIMUM AND 0.402 INCHES MAXIMUM IN |
| center_hole_diameter | 0.320 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN |
| cross-sectional_height | 0.095 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN |
| end_item_identification | 2840-01-114-2211,EHGINE, AIRCRAFT,TURBO-SHAFT;AH-64 APACHE |
| cross-sectional_shape_style | TEE INTERMEDIATE RING |
| material_document_and_classification | (5F573)409 FVMQ,75DURO,SHORE A,PER MIL-R-25988 CLASS 3 MFR REF SINGLE MATERIAL RESPONSE INTERMEDIATE RING |
| part_name_assigned_by_controlling_agency | AGT RING,SEAL COMPONENT PISTON TYPE;T-SEAL |
| NSN | 5330-01-498-1464 |
| CROSS-SECTIONAL HEIGHT | 0.095 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN |
| OUTSIDE DIAMETER | 0.437 INCHES NOMINAL IN |
| MATERIAL DOCUMENT AND CLASSIFICATION | (5F573)409 FVMQ,75DURO,SHORE A,PER MIL-R-25988 CLASS 3 MFR REF SINGLE MATERIAL RESPONSE INTERMEDIATE RING |
| CROSS-SECTIONAL SHAPE STYLE | TEE INTERMEDIATE RING |
| PERIPHERAL DIAMETER | 0.388 INCHES MINIMUM AND 0.402 INCHES MAXIMUM IN |
| INSIDE DIAMETER | 0.379 INCHES NOMINAL IN |
| HEIGHT | 0.250 INCHES NOMINAL IN |
| SPECIAL FEATURES | RINGS HAVE SCARF CUT AT 15 DEG PLUS 0 DEG OR MINUS 3 DEG |
| CENTER HOLE DIAMETER | 0.320 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | AGT RING,SEAL COMPONENT PISTON TYPE;T-SEAL |
No substitute or cross-reference records for this part.