PartsTable
Technical Data Sheet
813200 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOLT,BARREL is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL PLATE IN, length: 2.500 INCHES NOMINAL PLATE IN, diameter: 0.250 INCHES NOMINAL BAR IN, strike_type: RIM, special_features: WEIGHT:1.750 LBS PER DOZEN;BAR O/A LG:2.500 IN.NOM;MATL:STEEL; LBS, features_provided: SCREW. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2307, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
813200
NSN: 5340-00-240-2307
FSC: 5340
CAGE: 63204 — STANLEY INDUSTRIAL HARDWARE DIV THE STANLEY WORKS (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL PLATE IN
length2.500 INCHES NOMINAL PLATE IN
diameter0.250 INCHES NOMINAL BAR IN
strike_typeRIM
strike_quantity1
special_featuresWEIGHT:1.750 LBS PER DOZEN;BAR O/A LG:2.500 IN.NOM;MATL:STEEL; LBS
features_providedSCREW
surface_treatmentZINC PLATE
end_item_identificationW/S:STRATEGIC WEAPON SYSTEMS (PSEIDON AND TRIDENT)
nondefinitive_spec/std_data1011C TYPE
departure_from_cited_designatorVCBV
NSN5340-00-240-2307
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 813200 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
DEPARTURE FROM CITED DESIGNATOR: VCBV
NONDEFINITIVE SPEC/STD DATA: 1011C TYPE
FEATURES PROVIDED: SCREW
LENGTH: 2.500 INCHES NOMINAL PLATE IN
STRIKE TYPE: RIM
STRIKE QUANTITY: 1
TECHNICAL CHARACTERISTICS (FLIS)
DEPARTURE FROM CITED DESIGNATORVCBV
NONDEFINITIVE SPEC/STD DATA1011C TYPE
FEATURES PROVIDEDSCREW
SPECIAL FEATURESWEIGHT:1.750 LBS PER DOZEN;BAR O/A LG:2.500 IN.NOM;MATL:STEEL; LBS
END ITEM IDENTIFICATIONW/S:STRATEGIC WEAPON SYSTEMS (PSEIDON AND TRIDENT)
LENGTH2.500 INCHES NOMINAL PLATE IN
STRIKE TYPERIM
STRIKE QUANTITY1
WIDTH1.000 INCHES NOMINAL PLATE IN
DIAMETER0.250 INCHES NOMINAL BAR IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
N117-986Upgraded Successor
successor cross-reference
successor
FF-H-111Upgraded Successor
successor cross-reference
successor
A-A-462Upgraded Successor
successor cross-reference
successor
320432Upgraded Successor
successor cross-reference
successor
320441Upgraded Successor
successor cross-reference
successor
BHMA-A156.20 A83162 3-1/4INUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 813200?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 813200?
813200 is a BOLT,BARREL.
What parts can replace 813200?
There are 15 known substitutes for 813200: N117-986, FF-H-111, A-A-462 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 813200?
813200 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2307. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 813200