PartsTable
Technical Data Sheet
812E5269 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STAY,LOCKING is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 1.625 INCHES NOMINAL IN, overall_length: 18.625 INCHES NOMINAL IN, special_features: MOVES LEFT OR RIGHT, style_designator: SINGLE, features_provided: RETAINING LUG. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-660-0758, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
812E5269
NSN: 5340-00-660-0758
FSC: 5340
CAGE: 02413 — KERSEY / AMERICAN LAFRANCE A DIV OF FIGGIE INTERNATIONAL INC (USA)
SPECIFICATIONS
materialSTEEL
overall_width1.625 INCHES NOMINAL IN
overall_length18.625 INCHES NOMINAL IN
offset_quantity1
special_featuresMOVES LEFT OR RIGHT
style_designatorSINGLE
features_providedRETAINING LUG
surface_treatmentCADMIUM
operational_directionLEFT-HAND
mounting_hole_diameter0.250 INCHES NOMINAL IN
NSN5340-00-660-0758
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 812E5269 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SURFACE TREATMENT: CADMIUM
MOUNTING HOLE DIAMETER: 0.250 INCHES NOMINAL IN
FEATURES PROVIDED: RETAINING LUG
MATERIAL: STEEL
OFFSET QUANTITY: 1
STYLE DESIGNATOR: SINGLE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM
OVERALL WIDTH1.625 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.250 INCHES NOMINAL IN
FEATURES PROVIDEDRETAINING LUG
MATERIALSTEEL
OFFSET QUANTITY1
STYLE DESIGNATORSINGLE
OVERALL LENGTH18.625 INCHES NOMINAL IN
SPECIAL FEATURESMOVES LEFT OR RIGHT
OPERATIONAL DIRECTIONLEFT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
67490WG6749-1AInterchangeable
interchangeable cross-reference
interchangeable
6749Interchangeable
interchangeable cross-reference
interchangeable
21-1089802Interchangeable
interchangeable cross-reference
interchangeable
216505-01Interchangeable
interchangeable cross-reference
interchangeable
CFA40616Interchangeable
interchangeable cross-reference
interchangeable
13212E5520Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 812E5269?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 812E5269?
812E5269 is a STAY,LOCKING.
What parts can replace 812E5269?
There are 11 known substitutes for 812E5269: 67490WG6749-1A, 6749, 21-1089802 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 812E5269?
812E5269 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-660-0758. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 812E5269