PartsTable
Technical Data Sheet
Download PDF

8126401-2 — BOLT,SURFACE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8126401-2: BOLT,SURFACE.

The BOLT,SURFACE is a the manufacturer industrial component. Key specifications include end_item_identification: A/M32A-86 GENERATOR SET. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-147-2665, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8126401-2
NSN: 5340-01-147-2665
FSC: 5340 — Hardware, Commercial
CAGE: 98749 — SACRAMENTO AIR LOGISTICS CENTER SM-ALC/LIIL (USA)
SPECIFICATIONS
special_featuresSTEEL,C/O:CURVED ROD 10.875 IN.LG,1 HOLE DRILLED THRU 0.250 IN.FROM END THAT ATTACHES TO LATCH END,0.280 IN.HOLE DIAMETER,MADE FROM FSCM 19220,P/N 2-4972-5; IN
end_item_identificationA/M32A-86 GENERATOR SET
NSN5340-01-147-2665
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8126401-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS
SPECIAL FEATURESSTEEL,C/O:CURVED ROD 10.875 IN.LG,1 HOLE DRILLED THRU 0.250 IN.FROM END THAT ATTACHES TO LATCH END,0.280 IN.HOLE DIAMETER,MADE FROM FSCM 19220,P/N 2-4972-5; IN
END ITEM IDENTIFICATIONA/M32A-86 GENERATOR SET
SUBSTITUTES & CROSS-REFERENCES 1
5-4972-5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 8126401-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8126401-2?
8126401-2 is a BOLT,SURFACE.
What parts can replace 8126401-2?
There is 1 known substitute for 8126401-2: 5-4972-5. Substitute compatibility should be verified for your specific system.
What is the NSN for 8126401-2?
8126401-2 is cataloged in the U.S. Government catalog under NSN 5340-01-147-2665. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8126401-2