PartsTable
Technical Data Sheet
Download PDF

81264 — CABLE ASSEMBLY,POWER,ELECTRICAL

✓ Government record, cited
Jumbo · ORING SEAL
PRODUCT OVERVIEW

81264: CABLE ASSEMBLY,POWER,ELECTRICAL.

CABLE ASSEMBLY,POWER,ELECTRICAL. Key specifications include shape: CIRCULAR, diameter: 0.375 INCHES NOMINAL IN, material: RUBBER SYNTHETIC, thickness: 0.156 INCHES NOMINAL IN, shaft_type: ROUND, FLATTED, THREADED HOLE SINGLE ACTUATOR, flat_height: 0.219 INCHES NOMINAL SINGLE ACTUATOR IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-598-3427, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
81264
NSN: 5340-00-598-3427
NIINs: 005983427, 006780307, 007213908, 010611351, 014428740
FSC: 5340 — Hardware, Commercial
CAGE: 70359 — AMERICAN CASTING AND MFG CORP (USA)
SPECIFICATIONS
shapeCIRCULAR
diameter0.375 INCHES NOMINAL IN
materialRUBBER SYNTHETIC
thickness0.156 INCHES NOMINAL IN
shaft_typeROUND, FLATTED, THREADED HOLE SINGLE ACTUATOR
flat_height0.219 INCHES NOMINAL SINGLE ACTUATOR IN
shaft_length1.000 INCHES NOMINAL SINGLE ACTUATOR IN
hole_quantity2
overall_width3.250 INCHES NOMINAL IN
pole_quantity1 EACH SECTION REAR
terminal_typeTHREADED STUD
overall_height0.925 INCHES NOMINAL IN
NSN5340-00-598-3427
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 81264 MFR: Jumbo ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.375 INCHES NOMINAL IN
•
SHAPE: CIRCULAR
•
MATERIAL: LEAD ALLOY
•
HOLE QUANTITY: 2
•
THICKNESS: 0.156 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
DIAMETER0.375 INCHES NOMINAL IN
SHAPECIRCULAR
MATERIALLEAD ALLOY
HOLE QUANTITY2
THICKNESS0.156 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
835267-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
68A26B49Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 81264?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 81264?
81264 is a CABLE ASSEMBLY,POWER,ELECTRICAL manufactured by Jumbo.
What parts can replace 81264?
There are 2 known substitutes for 81264: 835267-00, 68A26B49. Substitute compatibility should be verified for your specific system.
What is the NSN for 81264?
81264 is cataloged in the U.S. Government catalog under NSN 5340-00-598-3427. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 81264

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.