PartsTable
Technical Data Sheet
Download PDF

81238 ITEM 7 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

81238 ITEM 7: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, nut_style: HEXAGON, nut_height: 0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-123-1418, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
81238 ITEM 7
NSN: 5310-01-123-1418
FSC: 5310 — Nuts and Washers
CAGE: 48422 — WILLIAM POWELL COMPANY, THE DBA POWELL VALVE DIV THE STARFLO CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
nut_styleHEXAGON
nut_height0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
nominal_thread_size0.312 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch24
material_document_and_classificationASTM A276, CONDITION A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-01-123-1418
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 81238 ITEM 7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A276, CONDITION A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
NUT HEIGHT: 0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A276, CONDITION A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
NUT HEIGHT0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH24
MATERIALSTEEL COMP 316 OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
08222Reference document
Same NSN cross-reference
Reference document — Secondary reference
F-60721-08221Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 81238 ITEM 7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 81238 ITEM 7?
81238 ITEM 7 is a NUT,PLAIN,HEXAGON.
What parts can replace 81238 ITEM 7?
There are 2 known substitutes for 81238 ITEM 7: 08222, F-60721-08221. Substitute compatibility should be verified for your specific system.
What is the NSN for 81238 ITEM 7?
81238 ITEM 7 is cataloged in the U.S. Government catalog under NSN 5310-01-123-1418. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 81238 ITEM 7