PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8122-160-HR
8122-160-HR ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 0.366 INCHES NOMINAL IN, material: PLASTIC POLYTETRAFLUOROETHYLENE INNER RING, inside_diameter: 8.528 INCHES NOMINAL IN, outside_diameter: 9.000 INCHES NOMINAL IN, rim_surface_width: 0.244 INCHES NOMINAL IN, peripheral_diameter: 8.995 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-906-1037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8122-160-HR
NSN: 5330-00-906-1037
FSC: 5330
CAGE: C3125 — GREENE TWEED & CO. GMBHDICHTUNGSSYSTEME (DEU)
SPECIFICATIONS
height0.366 INCHES NOMINAL IN
materialPLASTIC POLYTETRAFLUOROETHYLENE INNER RING
inside_diameter8.528 INCHES NOMINAL IN
outside_diameter9.000 INCHES NOMINAL IN
rim_surface_width0.244 INCHES NOMINAL IN
peripheral_diameter8.995 INCHES NOMINAL IN
center_hole_diameter8.683 INCHES NOMINAL IN
cross-sectional_height0.366 INCHES NOMINAL IN
end_item_identificationM110 HOWITZER FAMILY
cross-sectional_shape_styleSPECIAL INNER RING
NSN5330-00-906-1037
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8122-160-HR MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR BOTH SIDES
•
PERIPHERAL DIAMETER: 8.995 INCHES NOMINAL IN
•
RIM SURFACE WIDTH: 0.244 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.366 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 8.683 INCHES NOMINAL IN
•
INSIDE DIAMETER: 8.528 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 9.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR BOTH SIDES
PERIPHERAL DIAMETER8.995 INCHES NOMINAL IN
END ITEM IDENTIFICATIONM110 HOWITZER FAMILY
RIM SURFACE WIDTH0.244 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.366 INCHES NOMINAL IN
CENTER HOLE DIAMETER8.683 INCHES NOMINAL IN
INSIDE DIAMETER8.528 INCHES NOMINAL IN
OUTSIDE DIAMETER9.000 INCHES NOMINAL IN
HEIGHT0.366 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL INNER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
A265-1396AInterchangeable
interchangeable cross-reference
interchangeable
TCE-1284Interchangeable
interchangeable cross-reference
interchangeable
8122Interchangeable
interchangeable cross-reference
interchangeable
200X4Interchangeable
interchangeable cross-reference
interchangeable
J512DFIG5AInterchangeable
interchangeable cross-reference
interchangeable
SAE J512 4-2 040102BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8122-160-HR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8122-160-HR?
8122-160-HR is a PACKING ASSEMBLY.
What parts can replace 8122-160-HR?
There are 18 known substitutes for 8122-160-HR: A265-1396A, TCE-1284, 8122 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8122-160-HR?
8122-160-HR is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-906-1037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8122-160-HR

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026