8121-100C0G240J — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

8121-100C0G240J: CAPACITOR,FIXED,CERAMIC DIELECTR.

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.090 INCHES NOMINAL IN, body_height: 0.090 INCHES NOMINAL IN, body_length: 0.190 INCHES NOMINAL IN, terminal_length: 1.250 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-01-254-2031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 8121-100C0G240J

NSN: 5910-01-254-2031
FSC: 5910 — Capacitors
CAGE: 72982 — ERIE SPECIALTY PRODUCTS INC (USA)

SPECIFICATIONS

material	PLASTIC CASE
body_style	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width	0.090 INCHES NOMINAL IN
body_height	0.090 INCHES NOMINAL IN
body_length	0.190 INCHES NOMINAL IN
terminal_length	1.250 INCHES MINIMUM IN
terminal_diameter	0.020 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
reliability_indicator	ESTABLISHED
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
specification/standard_data	81349-MIL-C-20/35 GOVERNMENT SPECIFICATION
NSN	5910-01-254-2031

COMPONENT DIAGRAM

KEY FEATURES

•

TERMINAL DIAMETER: 0.020 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN

•

TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS: 0.0 SINGLE SECTION

•

BODY STYLE: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE

•

TOLERANCE RANGE PER SECTION: -2.00 TO 2.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.250 INCHES MINIMUM IN

•

BODY WIDTH: 0.090 INCHES NOMINAL IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

TERMINAL DIAMETER	0.020 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	0.0 SINGLE SECTION
BODY STYLE	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
TOLERANCE RANGE PER SECTION	-2.00 TO 2.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.250 INCHES MINIMUM IN
BODY WIDTH	0.090 INCHES NOMINAL IN
BODY HEIGHT	0.090 INCHES NOMINAL IN
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.001

SUBSTITUTES & CROSS-REFERENCES 5

902059-25Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

CCR09CG240GSSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MIL-C-20/35Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-PRF-20/35Reference document

Same NSN cross-reference

Reference document — Identification reference

0160-4775Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 8121-100C0G240J?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 8121-100C0G240J?

8121-100C0G240J is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).

What parts can replace 8121-100C0G240J?

There are 5 known substitutes for 8121-100C0G240J: 902059-25, CCR09CG240GS, MIL-C-20/35 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 8121-100C0G240J?

8121-100C0G240J is cataloged in the U.S. Government catalog under NSN 5910-01-254-2031. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

8121-100C0G240J — CAPACITOR,FIXED,CERAMIC DIELECTR

Request a Quote — 8121-100C0G240J