PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 81168
81168 ✓ Verified by PartsTable
Clementoni · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TUBE,BENT,METALLIC is a Clementoni industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-006-9722, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
81168
NSN: 5330-00-006-9722
FSC: 5330
CAGE: 10412 — WHITTAKER CORP WHITTAKER ELECTRONIC SYSTEMS DIV (USA)
SPECIFICATIONS
general_characteristics_item_descriptionC/O 81128 5/8-18X3.500 CAPSCREW MIN. GR 8, 81134 FLAT WASHERS TOP & BOTTOM, 81319 27/32 LG SPACERS(2) TOP & BOTTOM, 81314 RUBBER BEARING SHIELD, 81151 LOCK NUT
NSN5330-00-006-9722
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 81168 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HARDNESS RATING: 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
•
APERTURE LENGTH: 15.062 INCHES NOMINAL IN
•
APERTURE WIDTH: 11.250 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.093 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HARDNESS RATING35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
APERTURE LENGTH15.062 INCHES NOMINAL IN
APERTURE WIDTH11.250 INCHES NOMINAL IN
HOLE DIAMETER0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH12.500 INCHES NOMINAL IN
OVERALL LENGTH16.312 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.093 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
SAE-AS4842Interchangeable
interchangeable cross-reference
interchangeable
13304Interchangeable
interchangeable cross-reference
interchangeable
AN911-1DInterchangeable
interchangeable cross-reference
interchangeable
81168Interchangeable
interchangeable cross-reference
interchangeable
AMS-WW-T-700Interchangeable
interchangeable cross-reference
interchangeable
81168-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 81168?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 81168?
81168 is a TUBE,BENT,METALLIC manufactured by Clementoni.
What parts can replace 81168?
There are 7 known substitutes for 81168: SAE-AS4842, 13304, AN911-1D and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 81168?
81168 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-006-9722. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 81168

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026