Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
DRAWER,STANDARDIZED COMPONENTS C. Key specifications include material: STEEL OVERALL, hole_diameter: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.125 INCHES NOMINAL IN, overall_length: 5.70 INCHES MINIMUM AND 6.20 INCHES MAXIMUM IN, connection_type: UNTHREADED EXTERNAL TUBE FIRST ENDUNTHREADED EXTERNAL TUBE FIRST END, drive_end_shape: SQUARE FIRST END INTERNAL. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-255-0315, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
81116
NSN:5330-00-255-0315 FSC:5330 CAGE:80072 — H20 TANK INC U S MOTORS DIV (USA)
SPECIFICATIONS
material
STEEL OVERALL
hole_diameter
0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
2.125 INCHES NOMINAL IN
overall_length
5.70 INCHES MINIMUM AND 6.20 INCHES MAXIMUM IN
connection_type
UNTHREADED EXTERNAL TUBE FIRST ENDUNTHREADED EXTERNAL TUBE FIRST END
drive_end_shape
SQUARE FIRST END INTERNAL
connection_style
PLAIN (PIPE) SECOND ENDPLAIN (PIPE) SECOND END
style_designator
RIGID
aperture_diameter
0.625 INCHES NOMINAL IN
features_provided
MANUAL TOOL
surface_treatment
CHROMIUM OVERALL
bolt_hole_quantity
2
NSN
5330-00-255-0315
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
STYLE DESIGNATOR: NON-CIRCULAR
•
BOLT HOLE QUANTITY: 2
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
MATERIAL: PAPER AND GLUE AND GLYCERIN OVERALL
•
APERTURE DIAMETER: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
STYLE DESIGNATOR
NON-CIRCULAR
BOLT HOLE QUANTITY
2
MATERIAL DOCUMENT AND CLASSIFICATION
HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
OUTSIDE CORNER RADIUS
0.250 INCHES NOMINAL IN
OVERALL WIDTH
2.125 INCHES NOMINAL IN
MATERIAL
PAPER AND GLUE AND GLYCERIN OVERALL
APERTURE DIAMETER
0.625 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER
1.625 INCHES NOMINAL IN
HOLE DIAMETER
0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 81116?
81116 is a DRAWER,STANDARDIZED COMPONENTS C manufactured by Silverlit.
What parts can replace 81116?
There are 22 known substitutes for 81116: 1191-6CNX562, 1191-6CN9, 5340002913492 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 81116?
81116 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-255-0315. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.