PartsTable
Technical Data Sheet
Download PDF

810AS1230 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

810AS1230: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.625 INCHES NOMINAL0.625 INCHES NOMINAL IN, material: STEEL COMP 303 OVERALLSTEEL COMP 303 OVERALL, groove_width: 0.050 INCHES NOMINAL0.050 INCHES NOMINAL IN, thread_length: 0.325 INCHES NOMINAL RIGHT EXTERNAL0.325 INCHES NOMINAL RIGHT EXTERNAL IN, groove_diameter: 0.185 INCHES NOMINAL0.185 INCHES NOMINAL IN, style_designator: PROJECTION ONE END W/ RIGHT EXTERNAL THREADPROJECTION ONE END W/ RIGHT EXTERNAL THREAD. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-088-3768, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
810AS1230
NSN: 5340-01-088-3768
FSC: 5340 — Hardware, Commercial
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
length0.625 INCHES NOMINAL0.625 INCHES NOMINAL IN
materialSTEEL COMP 303 OVERALLSTEEL COMP 303 OVERALL
groove_width0.050 INCHES NOMINAL0.050 INCHES NOMINAL IN
thread_length0.325 INCHES NOMINAL RIGHT EXTERNAL0.325 INCHES NOMINAL RIGHT EXTERNAL IN
groove_diameter0.185 INCHES NOMINAL0.185 INCHES NOMINAL IN
style_designatorPROJECTION ONE END W/ RIGHT EXTERNAL THREADPROJECTION ONE END W/ RIGHT EXTERNAL THREAD
surface_treatmentOXIDE OVERALLOXIDE OVERALL
width_across_flats0.312 INCHES NOMINAL0.312 INCHES NOMINAL IN
cross-sectional_shapeHEXAGONHEXAGON
material_document_and_classificationASTM A582, TYPE 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALLASTM A582, TYPE 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-C-13924, CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALLMIL-C-13924, CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-088-3768
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 810AS1230 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.312 INCHES NOMINAL0.312 INCHES NOMINAL IN
•
LENGTH: 0.625 INCHES NOMINAL0.625 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924, CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALLMIL-C-13924, CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
GROOVE DIAMETER: 0.185 INCHES NOMINAL0.185 INCHES NOMINAL IN
•
THREAD LENGTH: 0.325 INCHES NOMINAL RIGHT EXTERNAL0.325 INCHES NOMINAL RIGHT EXTERNAL IN
•
STYLE DESIGNATOR: PROJECTION ONE END W/ RIGHT EXTERNAL THREADPROJECTION ONE END W/ RIGHT EXTERNAL THREAD
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582, TYPE 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALLASTM A582, TYPE 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE: HEXAGONHEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.312 INCHES NOMINAL0.312 INCHES NOMINAL IN
LENGTH0.625 INCHES NOMINAL0.625 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924, CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALLMIL-C-13924, CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
GROOVE DIAMETER0.185 INCHES NOMINAL0.185 INCHES NOMINAL IN
THREAD LENGTH0.325 INCHES NOMINAL RIGHT EXTERNAL0.325 INCHES NOMINAL RIGHT EXTERNAL IN
STYLE DESIGNATORPROJECTION ONE END W/ RIGHT EXTERNAL THREADPROJECTION ONE END W/ RIGHT EXTERNAL THREAD
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582, TYPE 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALLASTM A582, TYPE 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPEHEXAGONHEXAGON
SURFACE TREATMENTOXIDE OVERALLOXIDE OVERALL
MATERIALSTEEL COMP 303 OVERALLSTEEL COMP 303 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 810AS1230?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 810AS1230?
810AS1230 is a STANDOFF,THREADED,SPACING.
What is the NSN for 810AS1230?
810AS1230 is cataloged in the U.S. Government catalog under NSN 5340-01-088-3768. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 810AS1230

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.