810AS1210-1 — NUT,PLAIN,CAP

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

810AS1210-1: NUT,PLAIN,CAP.

The NUT,PLAIN,CAP is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL, nut_style: CAP, nut_height: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-088-6093, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

810AS1210-1

NSN: 5310-01-088-6093
FSC: 5310 — Nuts and Washers
CAGE: 98752 — WARNER ROBINS AIR LOGISTICS CENTER (USA)

SPECIFICATIONS

material	PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
nut_style	CAP
nut_height	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_class	2B
thread_series	UNIFIED NATIONAL COARSE (UNC)
thread_direction	RIGHT-HAND
width_across_flats	0.240 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
nominal_thread_size	0.112 INCHES IN
bearing_surface_type	CHAMFERED
thread_quantity_per_inch	40
material_document_and_classification	L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	5310-01-088-6093

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.240 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN

•

THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)

•

MATERIAL DOCUMENT AND CLASSIFICATION: L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.112 INCHES IN

•

NUT HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN

•

NUT STYLE: CAP

•

THREAD CLASS: 2B

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.240 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
THREAD SERIES	UNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATION	L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.112 INCHES IN
NUT HEIGHT	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
NUT STYLE	CAP
THREAD CLASS	2B
THREAD QUANTITY PER INCH	40
MATERIAL	PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL

OTHER ITEMS IN FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540

SUBSTITUTES & CROSS-REFERENCES 3

4-40X17/64HEXX9/32 HIGHReference document

Same NSN cross-reference

Reference document — Design control — primary reference

810AS1210Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

4-40X1/4 HEX X1/4 HIReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 810AS1210-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 810AS1210-1?

810AS1210-1 is a NUT,PLAIN,CAP.

What parts can replace 810AS1210-1?

There are 3 known substitutes for 810AS1210-1: 4-40X17/64HEXX9/32 HIGH, 810AS1210, 4-40X1/4 HEX X1/4 HI. Substitute compatibility should be verified for your specific system.

What is the NSN for 810AS1210-1?

810AS1210-1 is cataloged in the U.S. Government catalog under NSN 5310-01-088-6093. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

810AS1210-1 — NUT,PLAIN,CAP

Request a Quote — 810AS1210-1