The CYLINDER SLEEVE is a the manufacturer industrial component. Key specifications include material: IRON CAST, design_type: DRY, intake_hole: NOT INCLUDED, valve_recess: NOT INCLUDED, bore_diameter: 4.624 INCHES MINIMUM AND 4.625 INCHES MAXIMUM IN, overall_length: 11.625 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System under NSN 2815-00-278-1529, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | IRON CAST |
| design_type | DRY |
| intake_hole | NOT INCLUDED |
| valve_recess | NOT INCLUDED |
| bore_diameter | 4.624 INCHES MINIMUM AND 4.625 INCHES MAXIMUM IN |
| overall_length | 11.625 INCHES NOMINAL IN |
| top_intake_port | NOT INCLUDED |
| flange_thickness | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| special_features | CLEARANCE SLOT CUT AT TOP OF SLEEVE 19/32 IN BY 1-3/4 IN. IN |
| style_designator | DRY, FLANGED, RELIEVED |
| top_inside_chamfer | NOT INCLUDED |
| fsc_application_data | DIESEL ENGINE |
| NSN | 2815-00-278-1529 |
| FLANGE OUTSIDE DIAMETER | 4.937 INCHES MINIMUM AND 4.940 INCHES MAXIMUM IN |
| VALVE RECESS | NOT INCLUDED |
| INTAKE HOLE | NOT INCLUDED |
| TOP INSIDE CHAMFER | NOT INCLUDED |
| BOTTOM INSIDE CHAMFER | NOT INCLUDED |
| SPECIAL FEATURES | CLEARANCE SLOT CUT AT TOP OF SLEEVE 19/32 IN BY 1-3/4 IN. IN |
| FLANGE THICKNESS | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| BODY OUTSIDE DIAMETER | 4.878 INCHES MINIMUM AND 4.879 INCHES MAXIMUM IN |
| METALLIC HARDNESS RATING | 90.0 MINIMUM ROCKWELL B AND 95.0 MAXIMUM ROCKWELL B |
| TOP INTAKE PORT | NOT INCLUDED |