PartsTable
Technical Data Sheet
Download PDF

8101-42 — PLUG,VENT

✓ Government record, cited
— · MOTOR
PRODUCT OVERVIEW

8101-42: PLUG,VENT.

The PLUG,VENT is a the manufacturer industrial component. Key specifications include phase: SINGLE INPUT, duty_cycle: CONTINUOUS, flat_depth: 0.031 INCHES NOMINAL SINGLE END IN, temp_rating: 50.0 OPERATING CELSIUS, power_rating: 0.008 HORSEPOWER OUTPUT, winding_type: INDUCTION-SHADED POLE. This part is cataloged in the U.S.

Government catalog under NSN 6105-00-723-3413, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8101-42
NSN: 6105-00-723-3413
NIINs: 007233413, 012250459, 014395289
FSC: 6105 — Motors, Electrical
CAGE: 92435 — ALCO STANDARD CORP ALCO FOOD SERVICE EQUIPMENT CO ALCO DISPENSING SYSTEMS DIV (USA)
SPECIFICATIONS
phaseSINGLE INPUT
duty_cycleCONTINUOUS
flat_depth0.031 INCHES NOMINAL SINGLE END IN
temp_rating50.0 OPERATING CELSIUS
power_rating0.008 HORSEPOWER OUTPUT
winding_typeINDUCTION-SHADED POLE
overall_width3.281 INCHES IN
cooling_methodNONVENTILATED
overall_height3.281 INCHES IN
overall_length4.030 INCHES IN
shaft_diameter0.312 INCHES NOMINAL SINGLE END IN
mounting_methodFACE
NSN6105-00-723-3413
COMPONENT DIAGRAM
ELECTRIC MOTOR — FRAME SIZE = MOUNTING PATTERN SHAFT J-BOX MOUNTING FEET — FRAME — — · — RPM — · — PN: 8101-42 · OEM ⚠ VERIFY BEFORE ORDERING NEMA frame size determines mounting bolt pattern — not interchangeable. 56C ≠ 143T bolt pattern. C-face vs foot-mount vs flange — different mounting, same HP doesn't mean drop-in ✓ BROKER TIP TEFC = outdoor/washdown OK. ODP = dry indoor only. TENV = no external fan, explosion-proof areas. 1750 RPM = 4-pole (most common), 3450 RPM = 2-pole, 1150 RPM = 6-pole PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY TYPE AND QUANTITY: 2 THREADED STUD(S)
•
DUTY CYCLE: CONTINUOUS
•
PHASE: SINGLE INPUT
•
SHAFT DIAMETER: 0.312 INCHES NOMINAL SINGLE END IN
•
FREQUENCY IN HERTZ: 60.0 INPUT
•
WINDING TYPE: INDUCTION-SHADED POLE
•
MOUNTING METHOD: FACE
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY TYPE AND QUANTITY2 THREADED STUD(S)
DUTY CYCLECONTINUOUS
PHASESINGLE INPUT
SHAFT DIAMETER0.312 INCHES NOMINAL SINGLE END IN
FREQUENCY IN HERTZ60.0 INPUT
OVERALL LENGTH4.030 INCHES IN
WINDING TYPEINDUCTION-SHADED POLE
MOUNTING METHODFACE
COOLING METHODNONVENTILATED
SHAFT ROTATION DIRECTIONCLOCKWISE SINGLE END
SUBSTITUTES & CROSS-REFERENCES 1
R12CW4Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 8101-42?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8101-42?
8101-42 is a PLUG,VENT.
What parts can replace 8101-42?
There is 1 known substitute for 8101-42: R12CW4. Substitute compatibility should be verified for your specific system.
What is the NSN for 8101-42?
8101-42 is cataloged in the U.S. Government catalog under NSN 6105-00-723-3413. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8101-42